Turbine and Hydraulic Fluid Purifier Systems
Purpose: Reduce moisture, particulate and gas levels in bearing, turbine lube and hydraulic oils.
-Can purify oil containing up to 1% maximum water content to <.01% (100 PPM) free water at full flow rate.
-Oil with water content less than 1/2 of 1% shall be dehydrated to 50 PPM below saturation point at full flow rate.
-Average water removal rate is 0.5 to1.5% of the full flow rate of the unit (depending on incoming oil temperature & viscosity).
-The systems also reduce soluble gases and air to < 50% of the saturation level in a single pass through the system.
-Particulates are removed to a level of less than 3 microns using standard micron filters.
-Standard flow rates available: 75, 150, 300, 600, 900, 1200, 1500, 1800 and 2400 USGPH.